Specifications

General Type

Measuring Equipment

Additional Information

The new LOADEX 100 uses a 7<82><c4><f9> colour touch-screen display and additional keys providing a modern and ergonomic interface. Two pressure sensors are installed into the hydraulic lift system with up to two more installed on machines fitted with assistor accumulator cylinders. The pressure signals are captured, filtered and corrected by measuring the angle of the main boom using an inclinometer. Slope corrections are made from another inclination sensor on the chassis. Dipper arm position is established by a mechanical angle sensor mounted on the boom to dipper arm elbow pivot. This provides fast and precise dipper arm angle measurement that is not affected by inertia g-forces or\nacceleration effects. \nWhen used dynamically, the pressures are captured through a set weighing zone. The system may also be used in static weighing mode; the boom can either be lifted to a set weighing position where the pressure is captured, or measuring constantly in a <82><c4><fa>live<82><c4><f9> mode at any required boom height. Both\ndynamic and static weighing positions are adjustable by the operator to suit any job required, which will enable the machine to be used at its most efficient output. As an added option, oil temperature\ncompensation is provided by a clamp-ontemperature sensor. Ultrasonic technology is used to provide reliable and precise bucket position compensation (patent pending).

Specifications

Operating voltage: 10 - 30 Volts DC\nTemperature range: -20 to +70degrees Celcius operating\nSystem accuracy: Typically +per- 3percent of capacity or better\nSensor range: 0 - 400 bar\nEMC protection: Complies with 2004per108perEC\nISO14982\nWarranty: 1 year\nEnc. protection: Display sealed to IP54\nExternal sensors IP65